| | |
| Search By Manufacturer
| |
| | |
|
| Expanded Category Selection
|
| | |
| Shopping Cart
Your cart is empty.
| |
| | |
|
| | |
| Subscribe To Mailing List
| |
| | |
|
|
Home > Sealants > Polyurea > **1 Cartridge SealBoss 6600V QuickFix Universal Polyurea - 22oz. 1-1 Ratio Polyurea Vertical Joint Filler
**1 Cartridge SealBoss 6600V QuickFix Universal Polyurea - 22oz. 1-1 Ratio Polyurea Vertical Joint Filler
|
Manufacturer: SealBoss Corp.
|
Seal Boss
Static mixer required and sold separately (see ‘Related Products’ below)
Two Component
Flexible Polyurea Joint Repair System
Vertical Applications
Fast Concrete Joint Repairs
APPLICATION
Procedure
Remove all debris, oil and/or other contamination from
construction and saw joints. For best results re-cut joints with
a dry diamond blade. If area to be caulked is wet or damp, joint
must be primed with PU primer and allow to set to a slight tack.
Installation
Install caulk using a steady moderate flow of material, taking
care not to stop material flow for more than twenty seconds.
EQUIPMENT
SealBoss 6600-Vertical QuickFix
can be applied by
dual cartridge static mix guns or low pressure plural component
static mix equipment. Contact SealBoss for specific equipment
recommendations.
Pot Life
Pot life of 100g mass is three minutes @ 72°F. Higher
temperatures and larger quantities will shorten pot life. Lower
temperatures and smaller quantities will lengthen pot life.
Cure Time
Tack free in 5 minutes @ 72°F. Minimum age of concrete must
be 21-28 days, depending on curing and drying conditions
prior to applications.
Clean Up
Wipe up any excess
6600-Vertical QuickFix from concrete
and tools before it cures. Once 6600 has cured use a sharp
wall scraper to remove.
j
DESCRIPTION
Ö
6600-Vertical QuickFix is a two component,
rapid curing 1:1 ratio polyurea caulk designed
for sealing vertical and horizontal joints.
Ö
6600 is used to fill interior control joints or
new construction saw joints on vertical
surfaces. 6600 can be used in exterior
applications, where some joint movement
from thermal cycling will occur.
Ö
Standard color for 6600 is medium gray.
Custom colors are also available. Please
contact SealBoss for more information
on custom colors.
ADVANTAGES
Ö
100% Solids, Meets VOC Regulations
Ö
Remains Flexible, Even in Cold
Temperatures
Ö
Available in custom colors
Ö
Highly Moistue Insensitive
Ö
Odorless, No Toxic Vapors
Ö
Resistant to Petrochemicals
TYPICAL APPLICATION ENVIRONMENTS
Ö
Ö
Ö
Ö
Ö
Bottling and Canning Facilities
Ö
Ö
Water and Waste Water Treatment
Ö
Ö
Food Processing Facilities
Ö
3
Tube Set Preparation
6600-Vertical QuickFix
should be applied using the following
procedures: remove the red safety cap and white plug exposing
the open tube. Attach the static mixer to the cartridge set.
Secure the static mixer to the cartridge set by tightening the
retaining nut. Load the cartridge set into the dual position caulk
dispenser. Dispense the material. Available work time is
approximately thirty seconds.
Limitations
6600-Vertical QuickFix
is not intended for exterior or interior
joints that are subject to extreme movement. 6600 is a
moisture sensitive product. Repair areas that are wet or damp
must be primed. Contact SealBoss. for high movement joint
fillers and sealers.
Packaging
300 x 300 dual cartridges
750 x 750 dual cartridges
5 x 5 gallon pails
5 x 15 gallon ponies
55 x 55 gallon drums
270 x 270 gallon totes
SealBoss
6600-Vertical QuickFix TM
SealBoss
6600-Vertical QuickFix TM POLYUREA REPAIR SYSTEM
|
|
|
MSRP: $69.95
Your Price: $64.95
You Save: $5.00 (7 %)
SealBoss Hand Operated Dual Cartridge Gun • 300 ml x 300 ml, 220z
|
Your Price: Call For International Pricing
Air Operated Dual Cartridge Gun • 300 ml x 300 ml
|
|
|
| | | |
Product Reviews
|
| | |
| Shopping Cart
Your cart is empty.
| |
| | |
|
|
|