| | |
| Search By Manufacturer
| |
| | |
|
- > DIY Repair Kits, For Foundations, Walls, Floors
- > Concrete Repair, Injection, Waterproofing Equipment
- > Concrete Repair, Injection, Waterproofing Products
- > Floor Joint Fillers, Joint Repair, Caulking, DIY Kits
- > Lubricants, Commercial Grade Greases
- > Professional Fall Protection
- > Resources & Energy Saving
|
| | |
| Subscribe To Mailing List
| |
| | |
|
|
Cartridge SealBoss 6500-45 Exterior QuickFix Joint Fill & Repair Polyurea -Softer Formulation - 22oz. 1-1 Ratio, Made in the USA,
|
MSRP: $39.95
Your Price: $29.95
You Save: $10.00 (25 %)
Manufacturer: SealBoss Corp.
|
|
|
SealBoss ® Product Line:
Concrete Repair Products
Crack Injection Systems
Waterproofing Products
Joint Filler Compounds
Cartridge Systems
Specialty Coatings
Equipment & Accessories
|
SealBoss ® provides commercial grade, professional quality
concrete repair and waterproofing products, equipment and
accessories for commercial and residential applications.
|
|
SealBoss 6500-45 QuickFix Polyurea Joint sealer,
Polyurea Joint Filler, Fast Concrete Mender
For Larger Quantities call SealBoss directly at
1877-932-2293 or 714-662-4445
Static Mixer sold separately
Exterior - Interior Joint Filler & Repair System
Softer Formulation (Shore A 45), Flexible, Fast Cure Two Component Polyurea
ADVANTAGES
Interior and Exterior .
100% Solids, Meets VOC Regulations
Remains Flexible, Even in Cold Temperatures
Return Project to Service in 60 Minutes
Cures From -20OF to 130OF
Essentially Odorless, No Toxic Vapors
Resistant to Petrochemicals & Jet Fuels
RANGE OF A PPLICATION
To fill cracks, damaged control joints, construction joints on horizontal concrete
Highways, Taxiways, Runways, Sidewalks
Highly flexible, allowing slab movement, yet strong enough to protect the vertical edges of concrete from spalling under extreme loading
TYPICAL APPLICATION ENVIRONMENTS
Industrial Facilities
Highways / Freeways
Taxiways
Refueling / Maintenance Areas
Bridge Decks
Airport Runways
Sidewalks
Cold Storage Facilities
Food Processing Facilities
Freezers
TYPE OF MATERIAL
SealBoss 6500-45 QuickFix
TYPE OF MATERIALSealBoss 6500-45 QuickFix is a technologically advanced self leveling, 100% solids, two component, 1:1 ratio, flexible, joint filler for exterior and interior applications. The share A hardness of 45 offers necessary product properties for medium to high thermal cycling.
SealBoss 6500-45 QuickFix is excellent for time critical applications even in adverse temperature conditions ranging from -20F to 130F. The tack free free time is approximately 3 minutes. Jobsites can be reopened to vehicle and foot traffic after one hour. Exposure to sunlight (UV) may cause slight discoloration, however the physical properties are essentially unaffected. SealBoss 6500-45 QuickFix formula is suited for exterior control joints, new construction joints, and exterior random cracks on horizontal concrete surfaces to help protect from vehicles and seal joints against water and debris. The product is highly flexible to allow for normal joint and slab movement as designed, yet strong to protect the vertical concrete edges from spalling under light loads. Exposure to ultraviolet light will result in slight discoloration while the physical properties are unaffected. It is recommended to broadcast sand over the material before curing to minimize UV discoloration. APPLICATION
Clean the area of debris and contaminants, such as oils, loose materials, dirt, rubber etc., to allow for good adhesion of the product. Expose clean rough concrete for best results. Surface must be clean, dry and solid.
If using a saw to cut concrete and clean the crack, remove all the dust from the cut out area. Vacuum or blow off cement dust.
For bulk mixing, pre-mix each component thoroughly. Proportion equal parts by volume of Component "A" and Component "B" through appropriate metered mixing equipment. Mix only the quantity that can be used within 1 minute and do not allow mixed material to reside in static mixing head or mixer for more than 45 seconds or nozzle blockage may result.
Do not add solvents. They will prevent proper cure. Not for sealing cracks and joints under hydrostatic pressure or with extreme movement. Minimum age of concrete should be 21-28 days, depending on curing and drying conditions prior to applications. Refer to our supplemental literature and guidelines.
MAINTENANCE OF EQUIPMENT
Remove all excess sealant and any smears. Tools and mixing equipment are best cleaned immediately after use. Solvents are hazardous, aggressive towards plastic and rubber and might be in conflict with regulations on the jobsite. Caution! Some cleaners are combustible.
SAFETY / PRECAUTIONProtect your health! While working with this material, safety goggles, gloves and safety clothing must be worn at all times. While injecting, a full face shield is strongly recommended. Spills and blow-outs do happen! Protect yourself and others on the jobsite. Consider property in proximity of the application area to prevent loss or damage. Protect your jobsite from unauthorized persons. Store all materials and equipment safely and out of reach of children!
Observe container labels, MSDS, and instructions in the Product Catalog before using the product and equipment. In case one of the components comes in contact with the skin, wash thoroughly with soap and water. Provide adequate ventilation in volume and pattern in working area. Further protection: emergency showers and eyewash stations.
TECHNICAL DATA
PHYSICAL PROPERTIES:
Color (A+B) Clear Or Other
Viscosity (mixed) Self Leveling
Mix Ratio (by volume) 1:1
Pot Life 100 grms at 77F 1 - 1.5 min
Tack Free , Thin Film at 77F 3 min
Initial Cure 15 min
Final Cure 60 min
% of Elongation ASTM D-412 650-660
Tensile Strength, psi ASTM D-412 550-560
Tear Strength, psi Die C ASTM D-624 100-105
clean concrete, psi ASTM C-882 500
Shore "A" Hardness ASTM D-2240 45-48A
Toxicity Essentially Non-Toxic in Cured Form
Resistance to Chemicals Resistant to Most Organic Solvents, Mild Acids, Alkali and Micro Organisms
PACKAGING:
1:1 ratio by volume units: 22/44/56 oz. Cartridges, 2 gal. Units, 10 gal. Units
22oz. cartridge yields 39 cu. in.
Shelf Life: 1 year in original unopened container.
Storage Conditions: Store at 55F-85 F.
Disposal: Empty containers must be drip free.
Chemical Resistance:
Test Procedure; ASTM D-1308 @72F
R=Recommend
RC=Recommend Conditional =some swelling or discoloration
N=Not Recommend
1=Some discoloration only
Chemical Result
Acetic Acid 10 % R
Acetone RC
Battery Acid (Sulfuric Acid) RC
Brake fluid R
Chlorine (2,000ppm in H2O) R
Citric Acid R
Gasoline R
Hydraulic Oil R-1
Methanol (5%) Gasoline RC
Motor Oil R-1
Toluene RC
Vinegar R
Water R
Xylene R |
MSRP: $69.95
Your Price: $64.95
You Save: $5.00 (7 %)
SealBoss Hand Operated Dual Cartridge Gun • 300 ml x 300 ml, 220z
|
MSRP: $335.00
Your Price: $199.95
You Save: $135.05 (40 %)
D.I.Y. - 6500 - Fast Cure QuickFix 6500 Concrete Repair Kit - For "10 Minute" Repairs - by SealBoss (Flexible and High Strength Polyurea available) Call For Details.
|
MSRP: $299.00
Your Price: $179.95
You Save: $119.05 (40 %)
STRUCTURAL CRACK REPAIR ! USED FOR EARTH QUAKE DAMAGE REPAIRS! DIY Super Strong EPOXY Concrete Crack Repair Kit - For Basement, Pool and other Crack Repairs. Stronger than concrete! SealBoss Case Study on product page
|
MSRP: $79.95
Your Price: $69.95
You Save: $10.00 (13 %)
SealBoss 1:1 300ml x 300ml Hand Operated Dual Cartridge Gun
|
Your Price: Call For International Pricing
Air Operated Dual Cartridge Gun • 300 ml x 300 ml
|
|
| |
Product Reviews
|
| | |
| Shopping Cart
Your cart is empty.
| |
| | |
|
|
|