| | |
| Search By Manufacturer
| |
| | |
|
- > DIY Repair Kits, For Foundations, Walls, Floors
- > Concrete Repair, Injection, Waterproofing Equipment
- > Concrete Repair, Injection, Waterproofing Products
- > Floor Joint Fillers, Joint Repair, Caulking, DIY Kits
- > Lubricants, Commercial Grade Greases
- > Professional Fall Protection
- > Resources & Energy Saving
|
| | |
| Subscribe To Mailing List
| |
| | |
|
|
* Limited Offer SealBoss EPOXY GLUE PASTE SUPER KIT ! 4000 QuickSeal Cartridge System - 12 !!! CARTRIDGES, 12 Mixers, 1 Applicator Hand Gun
|
MSRP: $560.00
Your Price: $425.00
You Save: $135.00 (24 %)
Manufacturer: SealBoss Corp.
|
|
|
SealBoss ® Product Line:
Concrete Repair Products
Crack Injection Systems
Waterproofing Products
Joint Filler Compounds
Cartridge Systems
Specialty Coatings
Equipment & Accessories
|
|
SealBoss ® provides commercial grade, professional quality
concrete repair and waterproofing products, equipment and
accessories for commercial and residential applications.
Toll Free Telephone Support, SealBoss Hotline 1877-932-2293
For more detailed product information please look at these links:
|
|
FIX IT - GLUE IT - SEAL IT
As sold for structural repairs world wide
including earth quake related repairs in Los Angeles, Ca
& Christchurch, New Zealand
Read Case Study:
Professional
Structural Strength SealBoss 4000 QuickSeal
Epoxy Paste Adhesive Cartridge Repair System
Repair Cracked Concrete, Surface Seal Cracks
Adhesive For Surface Injection Ports
This Commercial Grade Kit includes:
1 Epoxy Injection Handgun 2:1 mix-ratio
12 34oz SealBoss 4000 Quickseal Epoxy Paste
12 Static Mixer Paste
1 Injection System Manual, Product Information
1 Pair Protective Latex Gloves
Injection Ports, Connectors and other Accessories sold separately
(picture shows 4000 LV and 4000 QuickSeal cartridges - this order only 4000 QuickSeal cartridges)
Toll Free Telephone Support, SealBoss Hotline 1877-932-2293
SealBoss 4000 QuickSeal Epoxy Adhesive Paste / Gel
RANGE OF APPLICATION
- Structural bonding of concrete, masonry, metals, wood, etc.
- Grouting bolts, dowels, pins, vertical and overhead, for extremely rapid setting, fast turn around times
- Seals cracks and around injection ports prior to pressure-injection grouting
- Interior, exterior, vertical and overhead repair of concrete as a super fast setting epoxy mortar binder.
ADVANTAGES
- Insensitive to moisture before, during and after cure
- High-modulus, high-strength, structural gel adhesive
- Excellent adhesion to concrete, masonry, metals, wood and most structural materials.
- Gel consistency ideal for vertical and overhead applications. Easy to mix 1: 1 ratio between components
- Extremely Fast Setting and high early strength-developing adhesive.TYPE OF MATERIAL
SealBoss ® 4000 QuickSeal Epoxy Paste is a 100% solids, high modulus, non-sag, non-shrink two component epoxy adhesive that bonds to concrete and other surfaces.
It meets ASTM-C-881, Type I and IV, Grade 3 Classes B and C for Epoxy Resin Adhesives.PROCESSING
To anchor bolts, dowels and pins Annular space around bolt tested at 1/8 inch; depth of embedment is typically 10-15 times the bolt diameter. See cartridge for application instructions.To seal cracks for injection grouting
Place the mixed material over the cracks to be pressure injected and around each injection port. Allow sufficient time to cure before pressure injecting.As a structural adhesive
Apply the mixed 4000 QuickSeal-Epoxy Structural Gel Epoxy to the mating or non mating prepared substrates. Work into the substrate for positive adhesion. Secure the bonded unit firmly into place until the epoxy has cured.
Non-sag gel, no flow. Pot Life: Approx. 5-10 minutes. (100 gram mass)
Appearance: Compound A = White , Compound B = Grey.
Concrete Application Recommendations:
Surface Preparation:Surface must be clean and sound. It may be dry or damp, but free of standing water. Remove dust, grease, curing compounds, waxes, foreign particles and disintegrated materials.
Important Disclaimer:
SealBoss Corp. 4000 Epoxy uses as " anchor " disclaimer:
Uses of that kind require special testing. Epoxy products are subject to aging. Initial maximum strength may
weaken over time. Substrate temperatures, UV-exposure, etc. need to be considered.
|
|
|
|
MSRP: $180.00
Your Price: $149.95
You Save: $30.05 (17 %)
SealBoss Epoxy Injection Tri Base Plastic Port with red cap. 100 per bag
|
|
MSRP: $39.99
Your Price: $34.99
You Save: $5.00 (13 %)
4000LV Low Viscosity Epoxy Resin for Structural Injection - Static Mixer Not Included - offered by SealBoss.
|
|
|
|
|
|
| | |
Product Reviews
|
| | |
| Shopping Cart
Your cart is empty.
| |
| | |
|
|
|