Browse by Manufacturer
     Search By Manufacturer

Browse Categories
Mailing Lists
     Subscribe To Mailing List

* Limited Offer SealBoss 4040LV Epoxy Resin Cartridge System - 12 Cartridges, 12 Static Mixers plus Applicator Hand Gun

<< Previous in Basement, Pool Repair Next in Basement, Pool Repair >>

MSRP: $560.00
Your Price: $399.75
Online Savings: $160.25 (29 %)
Manufacturer: SealBoss Corp.

 </>
SealBoss ® Product Line:

Concrete Repair Products
Crack Injection Systems
Waterproofing Products
Joint Filler Compounds
Cartridge Systems
Specialty Coatings
Equipment & Accessories
SealBoss ® provides commercial grade, professional quality
concrete repair
and waterproofing products, equipment and
accessories for
commercial and residential applications.
 

Toll Free Telephone Support, SealBoss Hotline 1877-932-2293
 
For more detailed product information please look at these links:
 
FIX IT - GLUE IT - SEAL IT
 
As sold for structural repairs world wide
including earth quake related repairs in Los Angeles, Ca
& Christchurch, New Zealand
 
Read Case Study:
 </>Professional
Structural Strength Epoxy Crack Cartridge Repair System
Repair Cracked Concrete
With SealBoss 4000 Line Structural Strength Epoxies 
 
 
This Commercial Grade Kit includes:

1 Epoxy Injection Handgun 2:1 mix-ratio
12 17oz SealBoss 4040 SLV Epoxy Injection Resin
12 Static Mixer Resin
1 Injection System Manual, Product Information
1 Pair Protective Latex Gloves
Injection Ports, Connectors and other Accessories sold separately
 
(picture shows 4040 LV and 4500 QuickSeal cartridges - this order only 4040 SLV cartridges)
 
Toll Free Telephone Support, SealBoss Hotline 1877-932-2293

SealBoss 4040 LV Epoxy Adhesive & Injection Resin

RANGE OF APPLICATION

- Structural Repairs
- Crack Injection and Gravity Feed in concrete, masonry, etc.
- Structural Joint Repair
- Welding Cracked Concrete
- Bolt Grouting
- Plate Grouting
- Delaminated Slab Welding
- Repairing Wood Beams
 
TYPE OF MATERIAL
SealBoss® 4040 LV-Epoxy-Resin is a 100% solids, high modulus, low viscosity non-shrink two component epoxy resin that bonds to concrete and other surfaces.

4040 LV-Epoxy-Resin, Type I and II, Grade 2 Classes B and C for Epoxy Resin Adhesives.

4040 LV-Epoxy-Resin is an easy flow formulation for good penetration into cracks and voids even at lower injection pressures. The product is insensitive to moisture. Due to the high tensile and compressive strength of the cured product, 4040 LV-Epoxy-Resin is ideal for structural repairs.

PROCESSING
4040 LV-Epoxy-Resin is composed of two components. The mixing ratio by volume is 2:1 (A:B).

Using our cartridge system either with a hand operated trigger gun or a convenient pneumatic or electric battery operated gun makes the application easy and clean. No matter how much material is dispensed the design of the gun will assure the correct mixing ratio. If a cartridge is not used up the plastic mixer needs to be replaced prior to the next use. Minimum surface temperature is 40F. Do not add solvents to the product.

 

 

 

 
 
 
</>
Important Disclaimer:
SealBoss Corp. specifically does not guarantee performance of product where 4000 Epoxy is used as an anchor.
Uses of that kind require special testing. Epoxy products are subject to aging. Initial maximum strength may
weaken over time. Substrate temperatures, UV-exposure, etc. need to be considered.
 
 

See More Related Products

SealBoss 3360 Hand Operated Heavy Duty Dual Cartridge Gun, 2:1 Ratio - 600ml x 300ml
Your Price: $82.95
 SealBoss 3360 Hand Operated Heavy Duty Dual Cartridge Gun, 2:1 Ratio - 600ml x 300ml
SealBoss Hand Operated Dual Cartridge Gun • 600 ml x 300 ml
SealBoss Air Operated Dual Cartridge Gun, 2:1 Ratio - 300ml x 150ml
Your Price: $505.95
 SealBoss Air Operated Dual Cartridge Gun, 2:1 Ratio - 300ml x 150ml
Air Operated Dual Cartridge Gun • 300ml x 150ml
* SealBoss Epoxy Injection Surface Port Plastic Tri Base - (plus red cap) 500 per Bag
MSRP: $180.00
Your Price: $150.00
Online Savings: $30.00 (17 %)
* SealBoss Epoxy Injection Surface Port Plastic Tri Base - (plus red cap) 500 per Bag
SealBoss Epoxy Injection Tri Base Plastic Port with red cap. 100 per bag
1 Cartridge SealBoss 4050 SLV Injection Epoxy Resin - 2:1 Ratio Epoxy Resin Cartridge, 17 OZ
Your Price: $29.95
1 Cartridge SealBoss 4050 SLV Injection Epoxy Resin - 2:1 Ratio Epoxy Resin Cartridge, 17 OZ
4050 SLV Low Viscosity Epoxy Resin for Structural Injection - Static Mixer Not Included - offered by SealBoss.
1 Cartridge SealBoss 4500 QuickSeal Epoxy Paste - 1:1 Ratio Epoxy Resin Cartridge, 22 OZ
Your Price: $35.00
1 Cartridge SealBoss 4500 QuickSeal Epoxy Paste - 1:1 Ratio Epoxy Resin Cartridge, 22 OZ
4500 QuickSeal Epoxy Paste - 22oz. Cartridge - Static Mixer Not Included offered by SealBoss
SealBoss Plastic Corner Surface Port
Your Price: $0.50
SealBoss Plastic Corner Surface Port
Plastic Surface Ports for Corner Epoxy Injection
SealBoss Plastic T-Base Surface Port
Your Price: $0.50
SealBoss Plastic T-Base Surface Port
Plastic Surface Ports for Epoxy Injection
Static Mixer SealBoss 4040LV
Your Price: $3.99
Static Mixer SealBoss 4040LV
4040LV Static Mixer
Static Mixer SealBoss 4500 QuickSeal
Your Price: $3.99
Static Mixer SealBoss 4500 QuickSeal
JointMaster Pro2 Static Mixer

Product Reviews

(0 Ratings, 0 Reviews)
Shopping Cart
          Shopping Cart

Your cart is empty.