Browse by Manufacturer
     Search By Manufacturer

Browse Categories
Mailing Lists
     Subscribe To Mailing List

***SEALBOSS 1500 WATER STOP FOAM CARTRIDGE STARTER KIT - 6 CARTRIDGES

<< Previous in Polyurethane Products Next in Polyurethane Products >>

Your Price: $189.95
Manufacturer: SealBoss Corp.

- ULTRA LOW VISCOSITY WATER STOP FOAM
- REORDER KITS AVAILABLE (SEE RELATED ITEMS BELOW)
- PNEUMATIC TOOLING AVAILABLE FOR INCREASED PRESSURES  (SEE RELATED ITEMS BELOW)
- SUPERIOR QUALITY 1:1 CLOSED CELL POLYURETHANE
- ACTIVE AND DRY CRACKS
- MECHANICAL PACKER KITS AVAILABLE (SEE RELATED ITEMS BELOW)
 
1-877-932-2293
1-714-662-4445
 

TYPE OF MATERIAL

SealBoss

 

 

® 1500 Water-Stop-Foam

 is a low viscosity

hydrophobic water activated (hydro active) water cut-off grout

and foam seal grout based on a MDI (methylene-diphenylisocyanate)

polyurethane. This product is a two component

formulation to be mixed at a 1:1 ration by volume. The resin

is 100% solvent free and 100% solids.

Upon contact with water the mixed

 

1500 Water-Stop-

Foam

 

 

 

reacts to a semi flexible foam while expanding its

volume 30 to 40 times. Since water is not a component of the

foam structure, the cured material is essentially not effected

by water or dryness. The reacted material does not shrink or

swell.

The advanced 1:1 formulation of the product resuts in a

very dense, closed cell structure when injected under pressure.

Very low counter pressure will result in a less rigid more

expanded product. For best waterproofing results a closed

cell structure is desired.

1500

 

Water-Stop-Foam

 is is designed for cutting off

water of even at elevated hyfrostatic pressures. Due to the very

low viscosity of the material,

 

1500 Water-Stop-Foam  offers

superior penetration in hairline crack injection. The product is

also suitable for the filling of larger spaces, cracks and

honeycombing in stone or concrete structures. To achieve

most satisfying and permanent results in certain applications,

a combination of

 

1500 Water-Stop-Foam  with other systems

of our product line may be advised. Ask your

 

SealBoss

 

technician for details.

PROCESSING

1500

 

Water-Stop-Foam

 is supplied in containers of A

and B components. The mix ratio by volume is 1:1. The

product can be pumped with either single or two-component

equipment. When used with single component pumps mix

product thoroughly before applying. Be aware of the highly

water reactive nature of the mixed material.

1500

 

Water-Stop-Foam

 reacts with the moisture in the

structure and does not need large amounts of water to react.

Simultaneous injection of water is typically not necessary. If

the area of application seems to be completely dry, preinjection

of water may be recommended.

Caution: This product is moisture activated. It is essential for

all equipment to be dry. Avoid any moisture contact with the

mixture to prevent premature reaction of the product. If reaction

of the batch occurs while pumping, immediately shut down

the machine and flush with a cleaner to avoid built up and

clogging of the equipment.

MAINTENANCE OF EQUIPMENT

Remove all excess product and any smears. Tools and

mixing equipment must be cleaned immediately after use.

R70

 

Pump Flush

 is good to your equipment and should

always be used. For best results please follow our

recommendations.

First Step

 

 

is conditional - Omit if in conflict with regulations on

the jobsite or the equipment you use: Flush first with a very

small amount of solvent (not supplied by us) to cut remaining

material. Caution: Xylol, Toluol, Acetone, M.E.K. are hazardous,

combustible, aggressive towards the environment,

equipment, seals and hoses. Immediately follow second

step.

Second Step:

 

 

Flush with R70 Pump Flush  circulate cleaner

through pump and hoses for several minutes at higher flow

rates.

 

R70 Pump Flush  is a solvent free, non-flammable

cleaner, lubricator and pump and hose conditioner. The

product ships without hazard label.

PRECAUTION

Protect your health! While working with this material,

safety goggles, gloves and safety clothing must be worn at all

times. While injecting, a full face shield is strongly

recommended. Spills and blow-outs do happen! Protect

yourself and others on the jobsite. Consider property in

proximity of the application area to prevent loss or damage.

Protect your jobsite from unauthorized persons. Store all

materials and equipment safely and out of reach of children!

Observe container labels, MSDS, and instructions in the

Product Catalog before using the product and equipment. In

case one of the components comes in contact with the skin,

wash thoroughly with soap and water. Provide adequate

ventilation in volume and pattern in working area. Further

protection: emergency showers and eyewash stations.

Water Activated,

Polyurethane Water Stop

& Seal Injection Foam Grout

Two Component, 1:1 Ratio

SealBoss

 

 

® 1500 Water-Stop-Foam

SealBoss

 

 

® 1500 Water-Stop-Foam

RANGE OF APPLICATION

Water Stop Foam For Infiltrating Water:

- Defective Concrete (Cracked or Honeycombed)

- Concrete Construction Joints & Cracks

- Limestone

- Brick Construction

- Pipe Intrusions

- Waste Water Tanks

- Drinking Water Reservoirs

- Sewers, Manholes, Utility Boxes, etc.

- Tunnels, Dams

- Soil Stabilization

- Elevator Pit Waterproofing

Bulk & Cartrid1500 Comp. A 1500 Comp. B

Appearance Colorless Brown

Solids 100% 100% ASTM D 1010

Density, lb/gal - g/ml 1.12 0.93 ASTM D 3800-79

Boiling Point, C / F 205C/400F 170/338F

Flash Point, C / F 180C/356F 125C/225F ASTM D 93-85

Viscosity, cps 90-98 90-98 ASTM D 2196

Mixing Ratio 1:1

by Volume

Solubility in Water not

Packaging 1 Gal 1 Gal

5 Gal 5 Gal

55 Gal 55 Gal

22oz. Dual Cartridge

Storage Good storage stability for unopened containers at 15 - 30 C

58 - 85 F in dry, sun free indoors environment 2 years shelf life (bulk)

Cartridge: 12 month shelf life

Reaction

Induction Time, 20C/68F 15 sec

Final Cure Time approx. 65 sec.

Properties for Cured

Product mixed with

Expansion, % approx. 4000 (40 Times)

Elongation, % 10-20 ASTM D 638

Tensile Strength 65 psi ASTM D 638

Shear Strength >15 psi ASTM C 273

Unconfined Compressive

Strength (Sand Filled) 1550 psi

Corrosiveness Non-Corrosive

Appearance Yellowish-White Polyurethane Foam

Toxicity Essentially Non-Toxic in Cured Form, MDI Based

Resistance to Chemicals Resistant to Most Organic Solvents,

Mild Acids, Alkali and Micro Organisms

T

TECHNICAL DATA

Revised 201207

Limited

Product Reviews

(0 Ratings, 0 Reviews)
Shopping Cart
          Shopping Cart

Your cart is empty.