| | |
| Search By Manufacturer
| |
| | |
|
- > DIY Repair Kits, For Foundations, Walls, Floors
- > Concrete Repair, Injection, Waterproofing Equipment
- > Concrete Repair, Injection, Waterproofing Products
- > Floor Joint Fillers, Joint Repair, Caulking, DIY Kits
- > Lubricants, Commercial Grade Greases
- > Professional Fall Protection
- > Resources & Energy Saving
|
| | |
| Subscribe To Mailing List
| |
| | |
|
|
SealBoss 1572 Water-Stop Foam Grout - NSF 61 Approved Polyurethane Resin
|
Your Price: From $127.95 to $438.00
Manufacturer: SealBoss Corp.
Product Options
| |
|
0.5 Gallon Accelerator Included - Additional Sold Separately Below
RANGE OF APPLICATION
Foam Sealant for infiltrating water through:
- Defective Concrete (Cracked or Honeycombed)
- Concrete Construction Joints & Cracks
- Limestone
- Brick Construction
- Pipe Intrusions
- Waste Water Tanks
- Drinking Water Reservoirs
- Sewers, Manholes, Utility Boxes, etc.
- Tunnels, Dams
TYPE OF MATERIAL
SealBoss 1572
Water-Stop-Foam is a very flexible
hydrophobic water / hydro activated water cut-off injection grout
based on a MDI (methylene-diphenyl-isocyanate) polyurethane.
The resin is 100% solvent free and 100% solids. The gel-time
of the product is adjustable by the mandatory adding of a certain
percentage of
152x Accelerator. 1572 Flexible Water-Stop-
Foam
was tested in accordance with NSF standard 61, for
contact with potable water at a maximum use level of 15cm
2/
liter.
Upon contact with water
1572 Water-Stop-Foam
reacts to a very flexible foam while expanding its volume 10 to
25 times. The cured material is flexible in its elongation and
compression properties, and is of a constant volume. Since
water is not a component of the foam structure, the cured
material is essentially not effected by water or dryness. The
reacted material does not shrink or swell.
Depending on the amount of accelerator added and
the pressure of injection,reacts to a very dense, closed cell,
flexible material or a more open cell, flexible product. For best
waterproofing results the closed cell structure is desired.
|
|
|
Your Price: Call For Prices
SealBoss Button Head Zerk Couple
|
|
|
Your Price: Call For Prices
SealBoss 13-100B Brass Mechanical Packer, 1/2" x 4"
|
MSRP: $2.99
Your Price: $0.79
You Save: $2.20 (74 %)
13-100B Buttonhead Brass Mechanical Packers, 1/2" x 4"
|
MSRP: $2.29
Your Price: $2.19
You Save: $0.10 (4 %)
13-60S Mechanical Steel Packer, 1/2" x 2.75"
|
MSRP: $2.99
Your Price: $1.98
You Save: $1.01 (34 %)
13-70Zi Zinc Mechanical Packers, 1/2" x 3"
|
MSRP: $995.00
Your Price: Call For International Pricing
SealBoss HP 100 hand operated single component pump
|
MSRP: $1,499.00
Your Price: Add to Cart to View Price
IP 495 Pro Single Component Pump
|
Your Price: From $12.00 to $43.00
SEALBOSS 15X-2 NSF TESTED HYDROPHOBIC PU GROUT ACCELERATOR, 0.5 GAL / PINT CONTAINER
|
Your Price: From $179.95 to $259.95
SEALBOSS COMPLETE HOSE SET - 9' / 15' / 30' SETS AVAILABLE
|
|
|
MSRP: $169.95
Your Price: $165.75
You Save: $4.20 (2 %)
SealBoss R70 Pump Flush for injection pumps and systems - 5 gallon or 1 gallon sizes
| | |
Product Reviews
|
| | |
| Shopping Cart
Your cart is empty.
| |
| | |
|
|
|